Trilex inc.

ARMOR CONDENSING WATER HEATER

Category:

Description

The ARMOR Condensing Commercial Water Heater combines stainless steel heat exchanger technology with Modulating Condensing combustion to deliver efficiencies as high as 99%. With ten models from 400,000 to 4,000,000 Btu/hr input, ARMOR will service a large range of commercial applications and add the “green” touch that building owners and facility managers desire.

– 10 Models from 400,000 to 4,000,000 Btu/hr
– Up to 99% Thermal Efficiency
– AWH0400NPM- AWH1000NPM 10:1 Turndown Ratio
– AWH1250NPM – AWH4000NPM 5:1 Turndown Ratio
– Direct Vent Flexibility Up to 150 feet
– SMART TOUCHℱ Operating Control and CON·X·USÂź Remote Connect
– Indoor/Outdoor Convertible

Additional information

Fournisseurs

Related products

  • ARMOR FLOOR MOUNT

    ARMOR is a fully condensing commercial gas water heater. Available in eight models with inputs ranging from 150,000 to 285,000 Btu/hr, the ARMOR achieves 96% thermal efficiency.

    With standard tank-type water heaters, your choices are limited when it comes to matching input with storage capacity to meet “peak demand” delivery requirements. With ARMOR, you can match one or more water heaters with one or more storage tanks in a wide variety of sizes. Lochinvar LockTemp¼ tanks are available from our 80-gallon vertical to the 5000-gallon vertical or horizontal model. Another advantage of the ARMOR “dual component” system is lower replacement costs. Standard tank-type designs require replacement of the entire water heater. With ARMOR, you’ll save time and money by only replacing individual components as needed, such as the pump or storage tank.

    • – 8 models from 150,000 to 285,000 Btu/hr
    • – 96% thermal efficiency
    • – 5:1 turndown ratio
    • – Condensing stainless steel heat exchanger
    • – SMART SYSTEMℱ Operating Control and CON·X·USÂź Remote Connect Capable
    The supplier

  • Squire

    ,

    The Squire Stainless Steel Indirect Water Heater — with 12 models to choose from in capacities from 30-119 gallons, we are sure to have the right size indirect water heater to fit your application.

    Squire features important enhancements that our customers will recognize and benefit from such as a welded and passivated stainless steel tank and heat exchanger, two inch thick, high-density insulating foam, and best of all it is designed, engineered and assembled in America.

    • – 12 models: 30-199 Gallons
    • – 316L Passivated stainless steel tank
    • – High capacity stainless steel coil
    • – Fully welded construction
    The supplier

  • SHIELD

    The SHIELDℱ commercial water heater features an advanced water heating system beautifully packaged for the smallest possible footprint. The SHIELD is available in ten models in standard and ASME construction. All utility connections are located at the top of the appliance to reduce equipment room footprint and increase installation flexibility. The SMART CONTROLℱ offers a bright, clear LCD display with soft-key buttons and a wide variety of advanced control functions. A large removable pump access panel on the left side as well as control and heat exchanger access in the front make serviceability a snap.
    The SHIELD water heater provides effective defense against a water heater’s worst enemy – lime scale buildup on the tank and heating surfaces. Tank type water heaters suffer from one thing the SHIELD does not, lime scale buildup. Lime scale insulates the water from the heat source, decreasing thermal efficiency and increasing operating costs. Just a Œ” of lime scale will increase fuel consumption and raise operating costs as much as 25%. Shield has no flue tubes inside the tank. The water is heated in a separate stainless steel heat exchanger mounted above the tank. By controlling and creating high water velocity through the heat exchanger, the heat surface areas are kept clean so thermal efficiency remains high, for life.

    • – 10 models from 125,000 to 500,000 Btu/hr
    • – Up to 96% thermal efficiency
    • – 5:1 turndown ratio
    • – Design prevents limescale build-up
    The supplier

  • Epic

    , , , ,

    Lochinvar has long been the innovation leader in commercial boilers—and now it’s bringing that engineering excellence to residential combi boilers. Lochinvar’s legendary reliability and performance are now available for apartments and homes, where the combi boiler’s next-generation fire tube design can provide hot water supply and space heating faster and more efficiently than ever before.

    The EPICℱ combi boiler provides a space-saving choice for builders and specifiers, lowering installation costs by reducing the mechanical equipment needed to provide rapid, reliable hot water supply and efficient space heating. It also gives plumbing contractors a money-saving alternative for single-family housing with 1 or 2 bathrooms.

    • – Industry-Leading DHW Delivery Up to 4.8 GPM
    • – True Instantaneous Response
    • – Easy Installation and Serviceability
    • – User-Friendly Interface

    The EPIC is also available as a boiler only version in four models.

    The supplier